2008

A Portable Readout System for Microstrip Silicon Sensors (ALIBAVA)
R. Marco-Hernandez (for the ALIBAVA Collaboration)
IEEE Nuclear Science Symposium and Medical Imaging Conference (IEEE NSS-MIC), Oct. 2008, Dresden, Germany
2008 IEEE NSS-MIC Conference Record, pp.3201-3208 (Pages: 2476-2483)
doi: 10.1109/NSSMIC.2008.4775030

Abstract: A readout system for microstrip silicon sensors has been developed as a result of a collaboration among the University of Liverpool, the CNM (Centro Nacional de Microelectrónica) of Barcelona and the IFIC (Instituto de Física Corpuscular) of Valencia. The name of this collaboration is ALIBAVA and it is integrated in the RD50 Collaboration. This system is able to measure the collected charge in one or two microstrip silicon sensors by reading out all the channels of the sensor(s), up to 256, as an analogue measurement. The system uses two ASIC chips to read out the detector(s). The system can operate either with non-irradiated and irradiated sensors as well as with n-type and p-type microstrip silicon sensors. Heavily irradiated sensors will be used at the SLHC, so this system can be used to research the performance of microstrip silicon sensors in conditions as similar as possible to the SLHC operating conditions. The system has two main parts: a hardware part and a software part. The hardware part acquires the sensor signals either from external trigger inputs, in case of a radioactive source setup is used, or from a synchronised trigger output generated by the system, if a laser setup is used. This acquired data is sent by USB to be stored in a PC for a further processing. The hardware is a dual board based system. The daughterboard is a small board intended for containing two ASIC readout chips as well as fan-ins and detector support to interface the sensors. The motherboard is intended to process the data, to control the whole hardware and to communicate with the software by USB. The software controls the system and processes the data acquired from the sensors in order to store it in an adequate format file. The main characteristics of the system will be described. Results of measurements acquired with n-type and p-type non-irradiated detectors using both the laser and the radioactive source setup will be also presented and discussed.

A portable readout system for microstrip silicon sensors (ALIBAVA)
M. Lozano, G.Pellegrini, G. Casse
3th Workshop on Advanced Silicon Radiation Detectors, 14-16 April, Barcelona, Spain
http://indico.cern.ch/conferenceDisplay.py?confId=28165

Abstract: The meeting aims to provide an overview of the results obtained with p-type and 3D sensors and to consider these results in the light of the most demanding requirements at future detectors (both pixels and micro-strips). The organisers think it is important that colleagues from the 3D, pixel (planar and 3D) and microstrip communities meet to present state of the art developments in sensors and connectivity and have time to discuss these. This need emerged, for example, during the last 2007 ATLAS upgrade workshop in Valencia, where the density of the programme limited the time available for discussion. As part of the Barcelona meeting, it is our intention to present to potential users a 40MHz read-out data acquisition system based around the ASIC analogue chip, the ALIBAVA system

information

 

    • LOCATION

      Edifici Eureka 
      Av. Can Domènech s/n
      Campus UAB
      08193 Bellaterra (Barcelona)
      Spain
      Phone: +34 932 222 777

      +34 935 868 832

      Mobile: +34 610 202 271

       

    • FOLLOW US

      icon-twitter icon-facebook icon-google icon-youtube icon-linkedin

      contact us

      This email address is being protected from spambots. You need JavaScript enabled to view it.
    •  CONTACT US